![3d go kart design software 3d go kart design software](https://pbs.twimg.com/media/DaoEkfIU0AA1SHu.jpg)
In design process, finite element analysis is always used in order to predict the behavior of the designed structure under different kind of loading or force before fabricating the actual structure. The frame of go-kart chassis structure usually consists of joints such as welded joints. The lower weight and better design of the chassis have the ability to improve their performance to a great extent.Ī go-kart structure is the small four wheeled vehicle that usually used in sports and recreation. Novelty/Applications - Go-kart type of small vehicles are primarily used for recreational and racing purposes which are mainly powered by batteries as well as low capacity engines. However, detailed modelling and simulation studies are needed before testing it in real-life conditions. Under different loading conditions, the design made up of CFRP composite was safest among all the materials used. Therefore, it can be inferred that the proposed design was completely safe under testing conditions. In every situation, factor of safety was more than one. Findings - The results of simulations performed under different conditions, showed this design has demonstrated adequate resistance against deformation in front, back and side impact tests. A comparative study of the obtained results was also carried out. These Go-kart chassis were tested under different loading conditions. In addition, this Go-kart chassis design was also made from three different materials i.e., AISI-4130, Al-6061 and CFRP composite. Global test standards were used to simulate the impact behavior on go-kart chassis. A 3D go-kart chassis was modelled and its Finite Element Analysis was carried out on Autodesk fusion 360 software. Methods/Statistical analysis - A new and lighter go-kart chassis model is proposed in this study. To determine the safest material for the proposed Go-Kart chassis design based on the results obtained. Another goal of this study is to make this design with different materials and also to test them in different loading conditions. Background/Objectives - The main objective of this study is to propose a new design of go-kart chassis and to assess the ability to bear the front, rear and side impacts on this proposed design.